CASES

一、Application

 It is suitable for impulse impact pressure test of high pressure pipelines, valves, engineering hydraulic hoses & hose assemblies,automobile hoses & aviation hose assemblies and small pressure-containers and other products.At the same time, the pressure can be boosting step by step for burst testing, the Max.impact pressure reach 500PSI, and the pressure and time can be set.

二、Technical Parameters

1) Impulse pressure:0～500PSI,adjustable;

2) Impulse frequency:2 Sec./time;

3) Test curves:Water hammer wave;

4) Pressurization rate:＞150MPa/s;

5) Generator displacement:3000ml

6) Pressure sensor measuring precision:6MPa±0.5%F.S;

7) Pressure gauge measuring precision:10MPa±1.0%F.S;

8) Temperature range:Temperature range;

9) Power supply:AC380V 60HZ

三、Function&Features

1) Automated test stand with high speed data acquisition system;

2) History screen and real-time display of pressure-time and time-temperature curves.

3) Test data saved automatically even in the case of emergency or power down happens accidentally.

4) Test report exported upon request and allows printed out for further analysis.

5) User configuration to impulse frequency and output pressure as per actual needs.

6) Closed circulating system for test medium to make sure the temp. and recycling efficiency needs.

7) Alarm devices are employed in case of leaking happened to tested specimens.

8) Sophisticated electric components guarantees the longer running life and high testing precision and stability.

9) Safety protection system against door opens (interlock design) to prevent damages to operators and testing system.

10) Warning and emergency stop against overpressure, leakage or power off to guarantee the safety operations.

四、Reference Photo