Application
The equipment is used for deep water simulation or static pressure testing of Marine products.
Reference Standards
GJB 368A-1994,General Outline of Equipment Maintainability
GJB 450-1988,General reliability guidelines for equipment development and production
GJB 9001B-2009,Quality management system requirements
Main Parameters
Test pressure: Max.25MPa;
Environment temp.:Room temp.;
Medium temp.:Room temp.;
Test medium: Water (non-corrosiveness);
Pressure control range: 0.1MPa-35MPa;
Booster time<5min. After filling, it is used to boost the pressure from 0 to 35MPa;
Work continuously more than 1 month;
Pressure drop <1%,for stable work continuously more than 1 month;
Pressure cavity: inner diameter 600 mm x 2200 mm;
Pressure cavity material: alloy steel or stainless steel (custom design based on customer requirements).
Pressure control precision: ±1%;
Display resolution pressure: 0.01 MPa, 10 psi or 0.1 bar;
Limit of allowable error of indicated value: ±0.5% FS.
Control mode: automatic PC control + manual buttons;
Features & Functions
Automatic control by PC, modular design.
Separate design for pumps&valve system and control system with reasonable layout.
Reasonable section for data display,easy operation,with data acquisition,enquiry,and could be printed out by end user.
Real time pressure display function for testing,the pressure can be automatically replenalized or depressurized to achieve the pressure and the set value.With pneumatic or electrical control of opening and closing of the cover for pressure tank.
Protection function: over-pressure, timeout, leakage automatic alarm system, manual emergency stop button.
High pressure pipe with brand USA FITOK, valves with USA HIP, pump with USA SC, pressure sensor with Germany WIKA .