Automotive Test System

Gear-box Oil Cooler Test, Motor Oil Cooler Burst Test Stand (P/N: A2026)

Standard:   · JB/T7356-2005      · JB/T 6920 1993

Application:

  ·   Applied to the burst/proof pressure test of motor oil and gear-box oil cooler, etc. Widely used in production plant, R&D institutions and other units for the purpose of product quality testing/inspection

Technical data:

   ·  Test pressure: Max. 5MPa

   ·Test port: 1port（can be extended to 2 ports） .

   ·  Pressure sensor precision: 0.5%FS

   ·  Constant pressure precision: ±2%FS

   ·  Timing range: 0～10000h；

   ·  Test medium: Water or Oil *(Optional)

   ·  Driven air supply: ≤7bar

   ·  Max air consumption: 1.6NM³/min

   ·  Power source: 220V AC

   ·  Dimension: 1500mm×650mm×1200mm

Features:

   ·    Fully automatic operation controlled by PLC, supports real time display of testing curves, pressure values and time, etc. 

   · Test data saved automatically when emergency or power down happens accidently.

   ·  User configuration on dwell time is applicable.

   ·  Automatic pressure compensating and stops after finishing tests.

   ·  All high pressure valves, pump, tubing and fittings made in USA with 316SS guarantee the high testing precision and stability.

   ·  Most of the liquid test medium are applicable.

   ·  Automatically alarms and terminates the test against over-load, overtime and leakage.

Pressurization mode（As shown）:

   Pressure strength: 5.0bar×3min，Burst pressure≥8bar(water)                    
   Pressure strength: 20.0bar×3min，Burst pressure≥35bar (oil)