Automotive Test System

Fire Extinguisher/Cylinder Valves Test Stand (P/N: A2043)

Ⅰ. Hydraulic test:

Standard:· JB6904-93    ·  EN849-1996   ·   EN_ISO_14246   ·  CUSTOMIZED

Application:

  Hydraulic test on fire extinguisher/cylinder valves. Widely used in production plant, R&D institutions and other units for the purpose of product quality testing/inspection.

Features:

• Fully automated test stand with high speed data acquisition system.

• History screen and real-time display of pressure-time curves.

• Test data saved automatically when emergency or power down happens accidentally.

• Test report exported upon request and allows printed out for further analysis.

• Takes air-operated pump as the high pressure source with a wide range of output pressure

• All high pressure valves, pump, tubing and fittings made in USA with 316SS to guarantee the high testing precision and stability.

• Most of the liquid test medium are applicable.

Ⅱ. Leak Test Stand 

Standard:· JB6904-93    · EN849-1996    · EN_ISO_14246    · CUSTOMIZED

Application:

  ·  Hydraulic test on fire extinguisher/cylinder valves. Widely used in production plant, R&D institutions and other units for the purpose of product quality testing/inspection.

Technical data:  Test pressure：Max. 100MPa Test medium: Air Test port：1port (or customized) Pressure sensor precision：0.5%FS Constant pressure precision：-2%～+2%； Timing range：0～999.99sec Timing precision: ≤±0.1% Ambient temp: Normal Power source：220V AC Dimension (main cabinet)：1000mm×800mm×1200mm Test chamber is available as customer' s request

Features:

• Fully automated test stand with high speed data acquisition system.

• Test data saved automatically when emergency or power down happens accidentally.

• Test report exported upon request and allows printed out for further analysis.

• Advanced valves, tubing and fittings guarantee the high testing precision and stability.

• Electric and proportional control technology is used for pressure control, easier operation and higher precision.

• Test methods: bubble leak test, differential pressure and mass flow leak test. *(optional) 

   

Ⅲ. Cycling Test Stand 

Standard:  ·  JB6904-93    · EN849-1996   · EN_ISO_14246

Application:

   Cycling (fatigue) test on fire extinguisher/cylinder valves. Widely used in production plant, R&D institutions and other units for the purpose of product quality testing/inspection.

Technical data: Test pressure：Max. 100Mpa Torque range: 0～50N.m Test medium: Air Test port：1port (or customized) Pressure sensor precision：0.5%FS Constant pressure precision：-2%～+2%； Timing range：0～1000h Test temp: Normal Power source：220V AC Dimension (main cabinet)：1600mm×800mm×1200mm

Features:

• Fully automated test stand with high speed data acquisition system. History screen and real-time display of pressure-time curves.

• Test data saved automatically when emergency or power down happens accidentally.

• Test report exported upon request and allows printed out for further analysis.

• Takes air-operated pump as high pressure source with a wide range of output pressure.

• User configuration on pulsing cycles is allowed.

• The on/off torque of cylinder valves can be set.

•  Specimen leakage alarm point can be set. When the leakage is reached the alarm set point, the system will automatically alarms and stops working, meanwhile, the computer power status remained.