Automotive Test System

Air-conditioner Condenser, Heater, Evaporator Burst Test Stand (P/N: A2025)

Application:

  ·Applied to the burst/proof pressure test of automobile air-conditioner condenser, heater abd evaporator, etc. Extensively used in production plant, R&D institutions and other units for the purpose of product quality testing/inspection.

Technical data:

  ·  Test pressure: Max. 20MPa                    ·  Test port: 1port（can be extended to 2 ports）

    ·  Pressure sensor precision: 0.5%FS         ·  Constant pressure precision: ±2%FS

    ·  Timing range: 0～10000h                         ·  Test medium: Water or Oil *(Optional)

    ·  Driven air : ≤7bar                                      ·  Max air consumption: 1.6NM3/min

    ·  Power source: 220V AC                            ·  Dimension：1200mm×650mm×1000mm

Features:

 ·  Fully automated test stand with high speed data acquisition system.

 ·  History screen and real-time display of pressure-time curves.

 ·  Test data saved automatically when emergency or power down happens accidently.

 ·  User configuration on dwell time is applicable.

 ·  Automatic pressure compensating and stops after finishing tests.

 ·  All high pressure valves, pump, tubing and fittings made in USA with 316SS to guarantee the high testing precision and stability.

 ·  Most of the liquid test medium are applicable.

 ·  Automatically alarms and terminates the test against over-load, overtime and leakage.

Pressurization Mode (As shown):

Condenser：Mode A，Pressure strength：50.0bar×3min，Burst pressure ≥110bar.
Evaporator：Mode A，Pressure strength：16.0bar×3min，Burst pressure ≥30bar.
Heater：Mode B，Dimension inspection：4.0bar×5min，Pressure strength：8.0bar×3min，Burst pressure ≥12bar.